3M Sun Control Window Film - Night Vision Series (Custom Sizes Available)

The 3M Night Vision Series is distinguished by its dual-reflective technology. The exterior side is more reflective to reject up to 71% of the sun's heat and provide daytime privacy, while the interior side is subtly tinted with significantly lower reflectivity to maintain superior night visibility. It features a durable, scratch-resistant coating that stands up to daily wear and cleaning. By blocking harmful UV rays, it drastically reduces fading on carpets, wood floors, and upholstery. Its warm, natural hue invites light into the room, enhancing the ambience without the harsh glare, making it a superior choice for spaces where evening views are paramount.

• Residential Homes: Bedrooms and living areas where night-time views and privacy are desired.

• Commercial High-Rises: Office buildings requiring glare reduction for screens and heat control for energy efficiency.

• Hotels & Restaurants: Dining areas and guest rooms where maintaining the evening view is part of the guest experience.

• Coastal Properties: Reducing intense glare from water reflection while protecting interiors from sun damage.

• Storefronts: Protecting merchandise from fading while maintaining a degree of visibility.

• Step 1: Surface Preparation Clean the glass surface thoroughly using a mild soapy solution. Use a window scraper or non-abrasive scrub pad to remove any stuck-on debris or paint specks.

• Step 2: Film Measuring & Cutting Measure your window pane carefully. Unroll the film and cut it to size, leaving an extra inch on all sides to allow for precise trimming during installation.

• Step 3: Application Generously spray the glass and the adhesive side of the film with a slip solution (water and baby shampoo mix). Place the film onto the wet glass.

• Step 4: Squeegeeing & Trimming Spray the face of the film with the solution to prevent scratching. Use a professional squeegee to push water and air bubbles out from the center to the edges. Trim the excess film with a sharp blade.

• Step 5: Curing & Maintenance Allow the film to cure (dry) completely, which allows the pressure-sensitive adhesive to bond. Clean with standard non-abrasive window cleaners after the curing period (typically 30 days).

• Authorised 3M Distributor: We supply genuine 3M Night Vision Series film directly from the official source.

• Custom Sizes: Available in various roll widths and lengths to minimize waste for your specific project.

• Technical Support: Expert advice on selecting the right shade (NV15, NV25, NV35) to balance your heat rejection and light transmission needs.